Majestic® and Defender® Annual System Bundle
The Annual FilterQueen Majestic and Defender System Bundle includes:
The Medi-Filter provides three times better-than-HEPA filtration to reduce pollutants such as dust, dust mites, pollen and mold spores.
(2) Enviropure Charcoal Filter Wraps:
The Enviropure Charcoal Filter Wrap is made with HEGA (High Efficiency Gas Absorption) material, which is highly effective at reducing pollutants such as tobacco smoke, pet odors and lingering cooking odors.
(12) Primary Pre-Filter BioCones:
This filter must always be used when operating the Majestic. It creates a nearly impenetrable wall against pollutants and protects the life of your Majestic motor.
(2) Medipure Premium Filter Cones:
The Medipure Premium Filter Cone contains a layer of non-woven, microfiber media that reduces dust mites, pollen, common bacteria, pet dander, odors, and other allergens.
(2) Motor Guards (Flat Disc Filter):
The Motor Guard (Flat Disc Filter) safeguards your Majestic motor to keep it in optimum working condition.
How often to change your filters:
Change once every year. For best results, change every 6 months for homes with pets or smokers.
Enviropure Charcoal Filter Wraps:
Change every 3-6 months. For best results, change every 3 months for homes with pets or smokers.
Change at least once a month.
Medipure Premium Filter Cone:
Change every 6 months.
Motor Guard (Flat Disc Filter):
Change every 6 months.
Changing your Defender filters:
To change the Medi-Filter or Enviropure Charcoal Filter Wraps, watch the instructional video or follow the instructions found below.
|1. After unplugging the Defender®, place the unit on its side and remove the retaining nut on the bottom of the unit by turning counterclockwise.||2. Return the unit to its upright position and lift off the top motor assembly.||3. Remove the Medi-Filter® Cartridge and Enviropure® Charcoal Filter Wrap. If only replacing the Enviropure® Charcoal Filter Wrap, remove the old charcoal filter from the Medi-Filter® Cartridge and discard it.
Note: The charcoal filter is fastened with velcro.
|4. Place the new Enviropure® Charcoal Filter Wrap around the outside of the Medi-Filter® Cartridge and fasten with the velcro provided. If also replacing the Medi-Filter® Cartridge, fasten the new Enviropure® Charcoal Filter Wrap to the new Medi-Filter® Cartridge. Return the filters to the unit.||5. Replace the top motor assembly.||6. Place the unit on its side to secure the retaining nut on the bottom of the unit. Return the unit to its upright position to resume use.|
Genuine Filter Check:
You can identify a genuine FilterQueen Medi-Filter by locating our phone number built right into both ends of the filter itself. Also, every Medi-Filter is serial numbered directly from the factory for quality control. Watch the video below for details on identifying a genuine FilterQueen filter.
Changing your Majestic filters:
To change the BioCones, Medipure Premium Filter Cone or Motor Guard (Flat Disc Filter), watch the instructional video or follow the instructions found below.
Changing the Majestic® Filter Cones
|1. Release side clamps and remove top unit from dirt container.||2. Remove Medipure® Premium Filter Cone and set aside or discard if installing new filter.||3. Empty contents of dirt container and Primary Pre-Filter BioCone™ into a large, open garbage bag.||4. Insert point of a new Primary Pre-Filter BioCone™ into the bottom of the dirt container.||5. Place the Medipure® Premium Filter Cone on top of the Primary Pre-Filter BioCone™.|
|6. Replace top unit and lock side clamps in place. Be sure all three tabs of the Primary Pre-Filter BioCone™ are visible. (Continue with Step 7 if replacing Motor Guard filter.)||7. Remove top unit as shown in Step 1 and then remove the cone guard. It may be necessary to use a Phillips screwdriver for some units.||8. Pull back the plastic retainer ring and lift the ring out. The filter can now be easily removed and discarded.||9. Replace Motor Guard filter. Place the filter over the center section of the screen. Replace retainer ring by squeezing the ring. Make sure the ring snaps into place.||10. Replace the cone guard. Be sure the outer edge of the cone is sealed on the rubber lip around the circumference of the unit. Replace screw if applicable. Replace top unit as shown in Step 6.|
Genuine Filter Check:
You can identify a genuine FilterQueen Filter Cone by locating our FitlerQueen logo and Health-Mor phone number printed on the filter itself. Also, every BioCone has the Genuine FilterQueen Seal printed on it, as shown below.